Login
My Garage
  1. Home
  2. Recalls
  3. Peugeot Rifter

Peugeot Rifter Recalls

There are currently 6 safety recalls out on the Peugeot Rifter. To find out whether your car is affected, you'll need to find your car's VIN number.

How to find your VIN

The VIN can often be found on the lower-left corner of the dashboard, in front of the steering wheel.

You can read the number by looking through the windshield. The VIN may also appear in a number of other locations:

  • Front of the engine block. This should be easy to spot by opening the bonnet, and looking at the front of the engine.
  • Front of the car frame, near the container that holds windshield washer fluid.
  • Rear wheel well. Try looking up, directly above the tyre.
  • Inside the driver-side doorjamb. Open the door, and look underneath where the side-view mirror would be located if the door was shut.
  • Driver-side doorpost. Open the door, and look near the spot where the door latches, not too far from the seatbelt return.
  • Underneath the spare tyre.
VIN Location Diagram

If you still can't locate the VIN, try consulting your vehicle manual. Or, call a dealership or the manufacturer and request guidance.

Step 2 - See if your car is affected
  • Announcement date:
    17/10/2022
    Recalls number:
    R/2022/298
    VIN start:
    VR3******HJ854623
    VIN end:
    VR3******NJ520501
    Car Build Date:
    23/10/2017 - 21/09/2021
    Concern:
    The Lower Metal Engine Protection Guard And Theunderside Of The Engine Exhaust System Could Trap Material In It.
    Defect:
    The possibility that the lower metal engine protection guard could trap material between it and the underside of the engine exhaust system
    Remedy:
    : Replace the metal under engine protection guard with a different design to prevent the collection of material.
  • Announcement date:
    16/07/2020
    Recalls number:
    R/2020/208
    VIN start:
    VR3******KJ900672
    VIN end:
    VR3******KJ900906
    Car Build Date:
    02/12/2019 - 18/01/2020
    Concern:
    The Inner Tie Rods Are Not Correct To Specification
    Defect:
    The inner tie rods connecting the steering rack to the track rod end are not correct to specification
    Remedy:
    Replace the steering rack inner tie rods (on both sides)
  • Announcement date:
    06/02/2020
    Recalls number:
    R/2019/448
    Car Build Date:
    01/01/1970 - 01/01/1970
    Concern:
    Potential Blocking Of The Urea Injector
    Defect:
    The urea injector may temporarily block
    Remedy:
    Update the engine management software.
  • Announcement date:
    26/11/2019
    Recalls number:
    R/2019/392
    VIN start:
    VF3******JJ877898
    VIN end:
    VF3******JJ845958
    Car Build Date:
    01/07/2018 - 08/11/2019
    Concern:
    The Passenger Outer Seat Belts May Not Be Correct To Specification
    Defect:
    The passenger outer seat belts may not be correct to specification
    Remedy:
    Replace the front outer passenger seat belt.
  • Announcement date:
    26/11/2019
    Recalls number:
    R/2019/400
    VIN start:
    VR3******KJ727963
    VIN end:
    VR3******KJ730540
    Car Build Date:
    30/06/2019 - 15/07/2019
    Concern:
    The Steering Column May Not Be Correct To Specification
    Defect:
    Steering columns were produced not according to specification.
    Remedy:
    Replacement of the steering column.
  • Announcement date:
    25/04/2019
    Recalls number:
    R/2019/132
    VIN start:
    VF3******JJ732282
    VIN end:
    VF3******JJ799213
    Car Build Date:
    08/11/2017 - 20/12/2018
    Concern:
    A Component Of The Handbrake Mechanism May Not Be Correct To Specification
    Defect:
    The handbrake mechanism may not be correct to specification.
    Remedy:
    Check the handbrake mechanism and if necessary replace the hand brake lever.
Step 3 - Contact your nearest dealer

Enter your postcode to see your nearest franchised dealer: